You must be anxious when your Windows 10 computer won’t boot after update. You get the BSOD and it repairs automatically then your computer goes blank and freezes. This issue could be fixed, read on to find how…
Before you try fixes, you should remove all the peripheral equipment and make sure the power cable is connected with your computer firmly. If you’re using a laptop, plug in your power cable instead of using the battery.
Try these fixes:
There’re 7 fixes, but you don’t have to try them all; just work your way down the list until you find the one that works for you.
- Try the Startup Repair
- Boot to Safe Mode
- Use Command Prompt
- Perform a system restore
- Reinstall your system
Fix 1: Try the Startup Repair
When your computer won’t boot, the first fix is always booting your computer into the recovery environment (RE) and perform the Startup Repair. Here’s how:
- Ensure your PC is off.
- Press the power button to turn on your PC, then hold the power button down until PC shuts down automatically (about 5 seconds).
- Repeat this more than 2 times until you see the Preparing Automatic Repair.
Note: This step aims to bring up the Preparing Automatic Repair screen. If you’ve seen this screen for the first time when you power up the computer, skip this step. - When Windows doesn’t boot properly, your computer would attempt to fix the problem by itself. Then wait for Windows to diagnose your PC.
- Next, you should see this screen. Select Troubleshoot.
- Click Advanced options.
- Choose Startup Repair.
- Choose an account, type your password and click Continue. It will diagnose your computer and fix it.
If the Startup Repair doesn’t work, then you can move to the Fix 2.
Fix 2: Boot to Safe Mode
Safe mode is an easy and convenient fix for the “Windows won’t boot” issue. It is an alternative boot scheme that uses a minimum of drivers, software and service to start your computer. By entering safe mode, you can trigger which part goes wrong and cause your Windows 10 computer won’t boot after update.
If your computer tells you Startup Repair couldn’t help, then you may follow steps to enter Safe Mode.
- Click Advanced options.
- Click Troubleshoot.
- Click Advanced options.
- Click See more recovery options.
- Click Startup Settings.
- Click Restart.
- Use arrow keys to select Safe Mode, then press the Enter key.
Fix 3: Use Command Prompt
The broken system files may relate to this issue. If so, you could run Command Prompt to check and fix the problem.
The first few steps are the same as Fix 1.
- When you see Advanced options, click System Restore.
- Choose the account, type password and click Continue.
- Type chkdsk/f to fix errors on the disk.
- After this process, reboot your computer to check.
Fix 4: Perform a system restore
This problem could be fixed by performing a system restore. If your computer won’t boot after the update, then reverse to the previous system logically should fix this issue.
Please note, system restore only affect recently installed programs and drivers.
The first few steps are the same as Fix 1.
- When you see Advanced options, click System Restore.
- Choose the account, type password and click Continue.
- Choose a restore point.
- Click Yes to start system restore.
Fix 5: Reinstall your system
If all else fails, you may have to reinstall your system. Reinstalling will delete all the data on your hard drive and this fix takes quite a long time.
If your system files have been damaged, reset your Windows 10 let you lose your data. But you turn something like that kind of insane crazy attractiveness
Hopefully this article has helped you resolve the ‘Windows 10 won’t boot after update’ error. If you have any questions or suggestions, please leave a comment below, and we’ll do our best to help.